Components Only Marketplace
Components Only Marketplace

The Superdozer

The Superdozer
Photo credit: Drake Trailers and Bowers Heavy Haulage
This article was published by Ben Hailes on 11 June, 2020

The history of equipment is littered with engineering marvels. Revered for their size and technology, these outliers often fail to achieve commercial breakeven points when manufactured on an industrial scale. Sadly, through poor timing or a misjudgement of market opportunities, these ‘failures' relate to a lack of market breadth rather than the machine itself.

Such was the case for the Komatsu D575 introduced in 1991 out of Osaka Japan. Despite celebrating 21 years of production, in 2012 it was deemed no longer viable with its smaller 475 sibling securing order volumes circa 20:1.

Primarily used as a coal mining dozer in strip mining pits in North America, Australia and New Zealand, the D575's primary competitor has always been the Cat's D11. As the dozer's closest and most successful rival, the D11 offers the most significant perspective to the Komatsu's overall size and blade capacity.

Weighing in at whopping 152.6t, the D575 was close to 50t heavier than today's D11.

Offering blade capacities of 69m3 and 96 m3 (compared with Cat's 27.2 m3 to 75 m3 range), the D575 was 11.7m long and 7.39m wide when fitted with a ‘standard blade' and powered by a stonking 12 cylinder, four stroke, water cooled, direct injected, turbocharged, intercooled 1,150 horsepower engine.

Marketed in Super ripper (SR) or Super dozer (SD) configuration, the SR's single shank ripper provided miner's a maximum digging depth of 2.06m and was often used to rip rock in areas where blasting was not permitted and ripping the only alternative. First introduced into operation at a West Virginia coal mine, the D575A assisted the mine in doubling its average meters per operating hour.

The D575's evolution included four main models and in 2001 was introduced as the D575A-3 SD aka Super dozer.

Incorporating extensive changes to its frame, powertrain, undercarriage and blade, it sported a significantly re-designed operator cabin and powertrain electronic control system making it substantially different from its predecessor.

In 1991 working with Drake Trailers, Bowers Heavy Haulage created a semi-modular widening low loader with 80 – 300 tonne capacity shifting this machine with blade and ROPS on, an incredible feat for its time completed by a Hunter Valley local.

To find out more about this move and gain an appreciation of the sheer size of this Super dozer visit

This article was originally published by the Components Only team in the June 2020 issue of "@ The Coal Face" magazine.

View all blog articles

About Components Only

Components Only is a global leader in the trade of heavy earthmoving components. Our team support users of equipment found in mining, earthmoving and construction, providing them the ability to buy, sell and source new, used, rebuilt and non-genuine components.
Read more /



Components Only is a proud member of the Independent Equipment Dealers Association (IEDA)

Our sites

Equipment Exchange
Components Only
Earthmoving Supplies

Contact Us

International Offices

Australia (Head Office)
+61 7 3708 1360

North America

Central Asia
+97 6 8903 6543

Latin America
+56 9 9994 1591

Australian Offices

Queensland, Brisbane
+61 7 3708 1360

Queensland, Mackay
+61 7 4863 1170

New South Wales, Singleton
+61 2 4062 7370

Western Australia, Perth
+61 8 6245 5399